The transfert tee-shirt of the Print’Jet range can be used with cotton or mixed cotton fabrics.

 Create the design :

• Insert a sheet of transfert paper into the printer, ensuring that you are printing onto the white surface.
• Don’t forget ! you must reverse your design with a graphic sofware. Otherwise your picture will be printed on the wrong side. It’s not necessary to print in high resolution.

 Transfer the design :

In order to obtain the best result, you must cut around the design in leaving the less white surface possible.

• Pre-heat your iron during 8 min at high temperature.
• Place a napkin on your ironing board and make sure it’s flat. Then, put your transfer T-shirt on your board.
• Put your transfer paper on the fabric.
• Fold a corner of the paper to make it easier to remove at the end.
• Iron evenly without steam for 1 or 2 mm.
• Make sure you insist on the sides and corners.
• Once you have finished, wait a minute before removing the paper. Start with the folded corner and pull evenly but steadily.

 Wash  :

• Wash cold, inside out.
• Use a special detergent with color protection.